– Wait a few minutes and then check again. Instructions for any messages not listed. Refer to the Midtronics Battery Tester - MCR340VKT- Operating The following is a list of the most frequent displayed messages Sometimes the display shows the malfunction or the messagesīased on the condition. – Remove the test terminals.Īlways use the DIN value on the battery label! Otherwise the test – Switch off the Midtronics Battery Tester - MCR340VKT. – If using an SAE value, go to “other” in the menu and change
Refer to Midtronicsīattery Tester - MCR340VKT- Operating Instructions. – Enter the DIN value in the Midtronics Battery Tester. If the label does not state a DIN value, then enter the – Write down the Battery - A- DIN value taken from the battery – Select the battery type (standard or AGM). Print function on the Midtronics Battery Tester - MCR340VKT. If the test results are needed to process a warranty claim, use the – Select “inside the vehicle” or “outside of the vehicle”. Make sure the test terminals make good contact! – Connect the black terminal (-) to the negative terminal for the – Connect the red terminal (+) to the positive terminal of the To Midtronics Battery Tester - MCR340VKT- Operating In‐ – Switch on the Midtronics Battery Tester - MCR340VKT- . Refer ⇒ “2.1.1 Battery with Color Display, Visual Indicator, Check‐ – Check the visual indicator on Batteries - A- with visual indica‐ Refer to Midtronics Battery Tester - MCR340VKT- Operating The Battery - A- temperature must be at least 10 ☌. – Use a fender protector or some type of cover before using anyĮquipment inside the engine compartment or inside the pas‐ – Remove the covers on the Battery - A- from the positive and – Open the hood or cover for other component locations of the Requirements – Read the device description. Used! There is a risk of explosion during testing, charging or jump Has »no color or is bright yellow«. Jump starting must not be ĭo not check or charge a Battery - A- when the visual indicator Always observe the following points: ♦ Safety precautions ♦ Midtronics Battery Tester - MCR340VKT- set-up guidelines ♦ Display menu ♦ Display button and LED ♦ Procedure in the Midtronics Battery Tester - MCR340VKT-īeetle 2012 ➤, Golf 2015 ➤, Golf Variant 2007 ➤, Golf Variant 2010 ➤. Luggage compartment) and all battery purposes (for the starter orįor the second/convenience battery). Teries - A- , all battery installed locations (engine compartment or The following charging and analysis procedures apply to all Bat‐ Further information can be found under ⇒ Self Study Program
Read all safety precautions and operating instructions in the Mid‐ Tester - MCR340VKT- in the USA and Canada. Only Volkswagen approved battery testers may be used to testīatteries - A- in Volkswagen vehicles. Use the Midtronics Battery
⇒ “2.6.5 Midtronics Battery Tester MCR340VKT Trouble‐ ⇒ “2.6.3 Battery Test, Performing using Midtronics Battery ⇒ “2.6.2 Midtronics Battery Tester MCR340VKT Device De‐ ♦ Midtronics Battery Tester - MCR340VKT- device description. Observe the Midtronics Battery Tester - MCR340VKT- Operating ⇒ “1.3 Warnings and Safety Precautions”, page 3 Risk of injury. Follow all warning messages and safety pre‐ MCR340VKT ”, page 25 ⇒ “2.6.4 Test Result Evaluation”, page 26 ⇒ “2.6.5 Midtronics Battery Tester MCR340VKT Troubleshoot‐ Tion”, page 24 ⇒ “2.6.3 Battery Test, Performing using Midtronics Battery Tester ⇒ “2.6.1 General Information”, page 24 ⇒ “2.6.2 Midtronics Battery Tester MCR340VKT Device Descrip‐
0 kommentar(er)
